Description
04-07 Chrysler Dodge Jeep 4.7L Cylinder Head
Remanufactured 04-07 Dodge 4.7L Left Cylinder Head with EGR.
Fits Engine: Dodge 4.7L SOHC 16V V8 VIN N/ P
Years: 04-07
Type: Cylinder Head with Valves and Springs
Condition: Remanufactured
Specifications:
LEFT Side #801AC with EGR
Manufacturer: Chrysler Dodge
Engine Sizes: 4.7L
Valves: 16V (w/2 heads)
Configuration: SOHC (single overhead camshaft)
Cylinders: V8
Casting #: 53020801AC, “801AC”
Side: Left (Driver)
VIN: N/P- Except HO.
NOT a Dual Plug version.
Components Included: Assembled with Valves, springs, rockers, and camshaft.
Sold as pictured.
Condition: Remanufactured Stock build in Good condition
Remanufacturing Valve Job Process:
- Cleaned and Inspected
- Pressure tested to insure no leaks
- Magnafluxed for Cast Iron
- Resurfaced/ Milled mating surface
- Grind valves, replaced if needed
- Cut 3-angle valve seats, replaced if needed
- New exhaust guides, others replaced if needed
- Vacuum test to insure valve seal
- New valve stem seals
- Clean and assemble
- All to manufacturers specs.
NO CORE CHARGE OR RETURN
Applications: SEE TAB
- Chrysler Aspen
- Dodge Dakota, Durango, Ram Series Trucks.
- Jeep Commander, Grand Cherokee
- Mitsubishi Raider 06-07
Fitment years are an estimate. We cannot confirm this item is a replacement fit for your part. Check your Casting number.
It is the buyers/installers responsibility to verify the correct match, final identification, of the replacement cylinder head and application.
Match your Casting number.
Check photos, actual products shown.
Please research before you purchase.
30 Day Warranty
Cylinder Heads are warranted against defective workmanships only, and are not unconditionally guaranteed against all hazards.
Warranty Void if any of the following occurs:
- Damage caused by improper installation.
- Overheating, detonation, pre-ignition, abuse, accident or neglect causing damage.
- Lack of lubrication.
- Head used in Track, Racing, or Competition use.
- Head used in commercial, ambulance, police, industrial, marine, high performance, or any use not intended for.
- Alterations or performance enhancements on stock head.
- Lack of repair or replacement of any accessory or service item, such as cooling system, fuel, electrical, and ignition system.
This Warranty is limited to REPLACEMENT OF THE HEAD ONLY. NO LABOR , NO PARTS allowance are given or intended.
Warranty is Not a replacement or refund of the equipment to which the product may be installed.
Warranty covers the Part Only – Cylinder Head.
- Covers products related to defective materials and or/workmanship only.
- Not a replacement or refund of the equipment to which the product may be installed.
- Does not cover Loss of time, use of vehicle, consequential damage, towing charges, rentals, storage fees, unauthorized repairs, freight,shipping, telephone calls, or injury or person or property.
- No inconvenience charges covered. No Labor covered. No allowance or intention.
Questions, Contact Us
EMAIL US
Call Us: 818 767-6603
NEED ENGINE WORK?
Email Us for a Rebuild Estimate, Parts, or Engine Kit
Visit our Blog for Rebuild Process and Photos. LosAngelesMachineshop.com
Visit our main Site for Machine Services Information. Vapengines.com
Remanufactured Head Warranty
It is the buyer's responsibility to verify the correct match for your application.
If you have questions, contact us
Match your Casting number.
Fitment years and information are an estimate. We cannot confirm this item is a replacement fit for your part. Do your research. Check your part numbers.
Check photos, actual product pictured.
90 Day Warranty
Warranty Void if any of the following occurs:
- Damage caused by improper installation.
- Overheating, detonation, pre-ignition, abuse, accident or neglect causing damage.
- Lack of lubrication.
- Head used in Track, Racing, or Competition use.
- Head used in commercial, ambulance, police, industrial, marine, high performance, or any use not intended for.
- Alterations or performance enhancements on stock head.
- Lack of repair or replacement of any accessory or service item, such as cooling system, fuel, electrical, and ignition system.
- Failure to thoroughly Clean or Replace Manifold.
Warranty covers the Cylinder Head Only
- Covers defective materials and or/workmanship only.
- Not a replacement or refund of the equipment to which the product may be installed.
- Does not cover Loss of time, use of vehicle, consequential damage, towing charges, rentals, storage fees, unauthorized repairs, freight, shipping, telephone calls, or injury or person or property. No Labor covered. No allowance or intention.
Message us with any questions.
DISCLAIMER:
- Fitment Responsibility: The buyer is responsible for verifying part numbers, compatibility, and pictures to ensure the part fits their vehicle.
- Liability Limitation: Manufacturers disclaim liability for injury, damage, or death resulting from improper use, installation, or failure of parts. The installer is liable and holds the responsibility of assuring that the new part matches the old part before proceeding with the installation.
- Installation Advice: Professional installation is strongly recommended, and improperly installed parts can void warranties
- No Professional Advice: Information on this website is for informational purposes only and is not intended to replace professional automotive advice or consultation with a qualified technician
- Warranty Limitations: Product warranties are limited to replacement of the defective part and do not include labor costs. Warranties are generally not transferable and do not apply to products modified or used for racing.
- No part will be warranted if used in high-performance applications, racing applications, and industrial applications
- We always recommend that the installer inspect the condition of all related components that pertain to the job, when replacing a part, to avoid failure of these components, in the future. Failure to do so may fail the new part installed and void the warranty.
- ALL USED PARTS ARE SOLD 'AS IS' WITH ALL FAULTS: Seller makes no warranties, express or implied, including the implied warranties of merchantability or fitness for a particular purpose. The buyer assumes the entire risk as to the quality and performance of the parts; for inspection, defects, and future repairs. No labor, towing, or incidental costs are covered. Used auto parts sold "as-is" are sold in their current condition with No guarantees regarding quality or performance. Parts are sold exactly as current state. No Labor Coverage- seller is not liable for installation, removal or labor cost.
If you have questions, Contact Us
.
This diagram will assist you to determine if you have a JTEC or NGC engine.
California Proposition 65 Cancer and Reproduction Warning:
WARNING: This product can expose you to chemicals including chromium (hexavalent compounds), which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
